KURZWEIL PC2X POWER SUPPLY INSTALL
KURZWEIL PC2X POWER SUPPLY SOFTWARE

KURZWEIL PC2X POWER SUPPLY INSTALL

The soundware consists of two п¬Ѓles: one п¬Ѓle contains basic soundware objects the other determines whether you install Orchestral programs and setups or General MIDI 1 programs. Your instrument must have Version 3.0 or later to work correctly with the PCR-1 option, and Version 4.0 or later for the PCR-2.

KURZWEIL PC2X POWER SUPPLY SOFTWARE

The operating system software deп¬Ѓnes the performance and editing characteristics of the PC2. PC2 Software ComponentsДЄll PC2-series instruments contain three main software components. The only system requirement is that you have current versions of the PC2 software components listed below. You can install the PCR-1/PCR-2 option in any PC2-series instrument, keyboard or rack-mount. If you donвЂ™t want to lose your user data when you install this option, do a SysEx dump of all objects before you begin the installation. It also deletes all user-deп¬Ѓned data (programs, setups, and effects) from the PC2вЂ™s memory.

The hard reset initializes the PC2 so that it can use the new sounds and programs. YouвЂ™ll be upgrading your PC2вЂ™s software as part of this installation, which means that youвЂ™ll need to do a hard reset before returning to normal operation. Before disassembling the instrument, touch a conductive metal surface to discharge any static electricity that you may have built up. Static electricity, even in small amounts, can cause damage to electronic components (especially memory). To prevent risk of electrocution, make sure that the PC2 or PC2R is disconnected from its power supply before you begin disassembling the instrument.

UserвЂ™s Guide describing new software features, as well as information about programs and setups Safety Precautions.

One or two keyboard overlays that you can put over the Sound Select buttons to help you п¬Ѓnd the new programs.

CD containing updated software and PC2 object п¬Ѓles.

Expansion board (single inline memory module, or SIMM).

In addition to this installation guide, your PCR-1/PCR-2 kit should contain the following items: There are installation instructions in this document both for instruments with the PCX-1 option and for those without it. If you have installed the PCX-1 polyphony expansion option in your instrument, youвЂ™ll need two PCR-1/PCR-2 expansion boards: one for the main sound engine board, and another for the PCX-1 sound engine board. The PCR-2 provides an array of classic keyboard sounds, and adds 128 programs and 32 setups to your PC2. And of course, you can reinstall into ROM as often as you like, so you can change your mind about which set of programs you keep in ROM. Whichever set of programs you decide to install into ROM, you can always load the other set of programs into RAM if you want both sets to be available at the same time.

As a General MIDI 1 set that conforms to the General MIDI 1 standard for program IDs and note assignments (the GM set).As a collection of orchestral programs and setups with customized performance controls (the Orchestral set).Once youвЂ™ve completed the hardware installation (one or more circuit boards), you can install the software portion of this option into ROM in one of two ways: A complete set of General MIDI 1 programs is included, too. The PCR-1 adds 264 programs and 32 setups to the PC2 series, including an extensive collection of orchestral samples: strings, winds, brass, percussion, vocals, organs, and ensembles. Finally, go to Updating Software on page 26 to determine which components of your PC2вЂ™s software you need to update. Then, depending on the model you have, turn to Installing in Keyboard Models on page 9, or Installing in Rack-Mount Models on page 17. Please read all of the introductory information in this document (through Tools and Materials Required for Installation) before proceeding with the installation. Thank you for purchasing a PCR-1 or PCR-2 ROM Expansion Kit. Version in Display DoesnвЂ™t Match Version of File.Returning to Normal Operations From the Boot Block Menu.Updating Operating System Software & Soundware Objects.Sequencer Software for Macintosh Computers.Sequencer Software for Windows-Compatible Computers.

Tools and Materials Required for Software Updates.

Tools and Materials Required for Installation.

Checking the Operating System Software Version.

Checking the Boot Block Software Version.

Kurzweil pc2x power supply